• Support

Tune the Digital TV card

The NTB115 and NTB3305 have a built-in TV Capture that can show either digital (Freeview) or analogue TV on the display device. There is no need to connect a Digibox to the NTB. The installation procedure is as follows:

1. Ensure that the NTB is connected to a working TV aerial.
2. Browse to the NTB and go to the "Setup | TV" page.
3. Click the "Scan for Digital TV Channels" button. The display device will go blue for several minutes while the scan completes. Continue with other tasks while the scan takes place.
4. Once the scan is complete, click the "Use New Channels" button. If an error message appears then check the TV connection.
5. Test a few TV channels by clicking the Audition buttons alongside the channel names.
6. If Analogue TV is required then click on the "Analogue" tab and fill out the channel number table. This information is easy to source from the Internet or your local TV or aerial repair shop.
7. Test a few TV channels by clicking the Audition buttons alongside the channel names.